Brief Description
Concealed door closer hinges provide a modern, efficient solution for smooth, quiet door operation. This guide outlines the installation process, including important considerations to ensure a successful installation.
Preparation:
Wear safety goggles and gloves for protection.
Ensure all parts and tools are ready.
Position hinges:
Measure and mark hinge locations on door and frame
Attach hinges to door:
Align the hinge with the mortise.
Tighten the screws with a screwdriver or drill.
Installing the hinge to the door frame:
Align the door with the door frame.
Secure the hinge to the door frame with screws.
Adjustment and checking:
Open and close the door to check for smooth operation.
Use a level to ensure that the door hangs straight.
Tighten all screws and make any necessary adjustments.
Precautions
Firmly fix the door frame:
Make sure the door frame is firmly fixed to the wall to prevent it from loosening after prolonged use.
Make sure that the door panel is installed correctly and does not tilt in the opening direction to prevent it from closing improperly.
Limit opening angle:
Do not open the door more than 115 degrees to avoid damage to the hinges and door.
Do not remove retaining clips during installation:
keep the retaining clips in place during installation to ensure that the hinges are correctly positioned.
Remove retaining clips after installation: Only remove the retaining clips after the installation is complete to avoid damage to the door and hinges.
Conclusion
Installing concealed door closer hinges requires careful measurement, alignment and observance of precautions. By following these steps and taking the necessary precautions, you can ensure that your door operates smoothly, quietly and looks stylish.
